Acme Model Engineering Co.

Dimensions and Specifications for Switch Controllers and Terminal Panels

Below is a drawing of our switch controller panels. Length and width dimensions
for all switch controller panels and terminal panels are given below drawing.
Only the #816 and #916 (shown this page) have two full rows of red and green buttons.
All other panels have only one row of 1-8 sets of buttons.
Illustrations of the other switch controllers, are shown on the main railroad products page.

This side is the length dimension

This side is the width dimension

Part number	No. of switches it can control	Overall width	Overall length
301-401	1	1 and 13/16"	1 and 1/16"
302-402	2	1 and 13/16"	1 and 13/16"
303-403	3	1 and 13/16"	2 and 9/16"
304-404	4	1 and 13/16"	3 and 5/16"
305-405	5	1 and 13/16"	4 and 1/16"
306-406	6	1 and 13/16"	4 and 13/16"
307-407	7	1 and 13/16"	5 and 9/16"
308-408	8	1 and 13/16"	6 and 5/16"
498-444 lighted 894-888 lighted	1	1 and 5/8"	1 and 3/4"
416 Terminal Panel	see railroad page	1 and 13/16"	6 and 5/16"
516 Terminal Panel	see railroad page	1 and 13/16"	6 and 7/8"

Series 301-308 and 816 are for flush mount
Series 401-408 and 916 are for frame mounting

Length dimension 1 and 3/4"

Width dimension 1 and 5/8"

This illustration is for all lighted controllers. 498 flush mount 444 frame mount 894 flush mount 888 frame mount

All control panels and terminal panels have four,
six or eight mounting holes, depending on the
size of the panel.
All panels are 1/8" thick.


Return to Page with Switch Controllers and Terminal Panels

Email us with any questions at sandra@maplewebdesign.com

This Website created by Maple Web Design
Small Business Affordable Website Design in New Jersey